High Quality Low Price Raw Plastic Polyurthane PPO

Product Description

 

Product Description

Product Description

PPO specification:
PPO resin (polyphenylene ether) intended for use as additive or building block in a variety of thermoplastics, thermoplastic elastomers including styrenic block copolymers, and thermoset materials including epoxies, phenolics, polyurethanes, and unsaturated polyesters.

PPO has the excellent characteristics of physical mechanical properties, heat resistance, and electrical insulation. It is famous among the engineering thermoplastics for its low water absorption rate, high hardness, excellent dimensional stability and anti-creeping under high temperature.  

PPO Granules Application: Electronic and Electrical, Household Electrical Appliance, Office Automation Equipment, Automobile, Architecture Materials, aviation & Aerospace . 

 

Packaging & Shipping

 

Professional Service

With over 10 years of factory experience, Suzhou Furenxiang Trade Co., Ltd. is dedicated to providing you with the highest quality products.

Good and Guaranteed Quality

Our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 is made with the utmost care and attention to detail, ensuring its excellent quality and durability.

Best Price for You

We offer the best price for our high-quality products, allowing you to get the best value for your money.

Perfect Service Management System

At Suzhou Furenxiang Trade Co., Ltd., we have a perfect service management system in place to ensure that your needs are met and that you receive the best possible customer service.

Customization Supported

We understand that every customer is unique, which is why we offer customization options for our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66. You can tailor the product to your specific requirements.

 

TYPICAL PROPERTY VALUES

PROPERTIES

TYPICAL VALUES

UNITS

TEST METHODS

(1)
MECHANICAL

Tensile Stress, yield, 50 mm/min			73	MPa	ISO 527
Tensile Stress, break, 50 mm/min			55	MPa	ISO 527
Tensile Strain, yield, 50 mm/min			4.5	%	ISO 527
Tensile Strain, break, 50 mm/min			8	%	ISO 527
Tensile Modulus, 1 mm/min			2600	MPa	ISO 527
Flexural Stress, yield, 2 mm/min			110	MPa	ISO 178
Flexural Modulus, 2 mm/min			2500	MPa	ISO 178
IMPACT	(1)
Charpy Impact, unnotched, 23°C			10	kJ/m²	ISO 179/2C
Izod Impact, notched 80*10*4 +23°C			10	kJ/m²	ISO 180/1A
Izod Impact, notched 80*10*4 -30°C			6	kJ/m²	ISO 180/1A
THERMAL		(1)
CTE, -40°C to 40°C, flow			8.E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C,xflow			8.E-05	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C			125	-	IEC 60695-10-2
Vicat Softening Temp, Rate B/120			140	°C	ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm			117	°C	ISO 75/Af

PHYSICAL

PROPERTIES

TYPICAL VALUES

UNITS

TEST METHODS

Specific Gravity		1.1		ASTM D792
Density		1.1	g/cm³	ISO 1183
Melt Volume Rate, MVR at 260°C/10 kg		13	cm³/10 min	ISO 1133
Melt Volume Rate, MVR at 280°C/5.0 kg		10	cm³/10 min	ISO 1133
INJECTION MOLDING	(2)
Drying Temperature		105	°C
Drying Time		3 - 4	Hrs
Maximum Moisture Content		0.02	%
Melt Temperature		280 - 300	°C
Front - Zone 3 Temperature		270 - 290	°C
Middle - Zone 2 Temperature		280 - 300	°C
Rear - Zone 1 Temperature		260 - 280	°C
Hopper Temperature		60 - 80	°C

 

Company Profile

COMPANY INFORMATION

Our company is a plastic manufacturer and agent for internationally renowned brands:

1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing.

In terms of technology, in order to ensure the accuracy of product data and the unity of product performance indicators, the company has introduced a number of related tests such as flow testers, electronic water quality testers, environmental detectors, halogen testers, whiteness testers, constant temperature ovens, etc. Equipment, plastic dryers, film blowing machines, tablet presses, etc. Our materials are widely used in automobile manufacturing, household appliances, communication electronics, industrial equipment and other industries.

2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic,Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc.

 

Certifications

FAQ

Q:What can you buy from us?
A:PLA,PCTG,ABS,EAA,POM,EVA,POE,PPSU,EMAA,PA66,PC,PC/ABS,PE,POP.

Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.

Q:What are your terms of payment?
A:T/T, L/C,D/P,D/A. Option A:30% pay in advance, 70% before shipping

Q:What is your packing?
A:Basically our packing is in 25/KG bags.

Q:Where is the loading port?
A:Usually Shanghai.

Q:What is the normal lead time?
A:  We will send goods to departure port within 7-15 workdays after we receive your payment.

Q:If any quality problem, how can you settle it for us?
A:When discharging the container, you need to inspect all the goods. If anybreakage or defect products were found, you MUST take the pictures fromthe original carton. All the claims must be presented within 7 working days after discharging the container.This date is subject the arrival time of container. We will advise you to certify the claim by third party,or we can accept the claim from the samples or pictures you present, discharging of the containeris not included. Finally we will completely compensate all your loss.
 

Exhibition