PPA Engineering Plastics High Dimensional Stability Htnfr52g30nh-Bk337 Htnfr52g30nh-Nc010 Dutont PPA

• Customization: Available
• Color: Customized
• Model No.: PPA
• Model NO.: HTNFR52G30NH-BK337 HTNFR52G30NH-NC010
• MOQ: 25kg
• Usage: Engineering Plastics
• Plastic Forming Method: Injection Molding
• Plastic Properties After Heated: Customized
• Sample: Available
• Delivery: 7-15 Days
• Material Attribute: Injection Grade
• Transport Package: 25kg/Bag, 40bag/Pallet
• Specification: 380*130*745(mm)
• Trademark: Dutont
• Origin: America
• HS Code: 3908909000
• Production Capacity: 1000t/Month
• Package Size: 60.00cm * 40.00cm * 17.00cm
• Package Gross Weight: 25.000kg

Product Description

 

Product Description

 

Polyamide PPA: High Wear Resistance Engineering Plastics

 

Polyamide PPA is a thermoplastic material that is translucent or opaque milky white in color. It is known for its light weight, good toughness, chemical resistance, and excellent durability.

 

One of the most notable advantages of Polyamide PPA is its exceptional wear resistance. In fact, it surpasses all other fibers in this aspect, with a wear resistance that is 10 times higher than cotton and 20 times higher than wool. Additionally, the strength of nylon fiber, which is the main component of Polyamide PPA, is 1-2 times higher than cotton, 4-5 times higher than wool, and 3 times higher than viscose fiber.

 

In the industry field, Polyamide PPA is widely used for various applications. It is commonly utilized in the production of round gears, cams, bevel gears, rollers, pulleys, pump impellers, fan blades, worm gears, and more.

Key Features:

• Translucent or opaque milky white particle


• Thermoplastic material


• Lightweight and tough


• Chemical resistant


• High durability


• Exceptional wear resistance


• Strength surpasses cotton, wool, and viscose fiber

 

Applications:

• Automobile industry


• Engineering industry


• Production of single-purpose machines

 

For more information about Polyamide PPA and other high dimensional stability engineering plastics, please contact Suzhou Furenxiang Trade Co., Ltd.
 

Product Parameters

HIGH PERFORMANCE POLYAMIDE RESIN

Zytel® HTN51G35HSL NC010 is a 35% glass reinforced, heat stabilized, lubricated, hydrolysis resistant high performance polyamide resin. It is also a PPA resin.

Product information
Resin Identification	PA6T/XT-GF35		ISO 1043
Part Marking Code	>PA6T/XT-GF35<		ISO 11469
Part Marking Code	>PPA-GF35<		SAE J1344
ISO designation	ISO 16396-PA6T/XT,GF35,M1GHNR,S10-120
Rheological properties	dry/cond.
Molding shrinkage, parallel	0.2 / -	%	ISO 294-4, 2577
Molding shrinkage, normal	0.6 / -	%	ISO 294-4, 2577
Typical mechanical properties	dry/cond.
Tensile modulus	1.74E6 / 1.74E6	psi	ISO 527-1/-2
Tensile stress at break, 5mm/min	30000 / 30000	psi	ISO 527-1/-2
Tensile strain at break, 5mm/min	2.4 / 2.2	%	ISO 527-1/-2
Flexural modulus	1.49E6 / 1.49E6	psi	ISO 178
Flexural strength	43500 / 42100	psi	ISO 178
Tensile creep modulus, 1h	* / 1.6E6	psi	ISO 899-1
Tensile creep modulus, 1000h	* / 1.38E6	psi	ISO 899-1
Charpy impact strength, 73°F	28.5 / 26.2	ftlb/in²	ISO 179/1eU
Charpy impact strength, -22°F	28.5 / 23.8	ftlb/in²	ISO 179/1eU
Charpy notched impact strength, 73°F	5.23 / 5.23	ftlb/in²	ISO 179/1eA
Charpy notched impact strength, -22°F	4.76 / 4.76	ftlb/in²	ISO 179/1eA
Charpy notched impact strength, -40°F	5.23 / -	ftlb/in²	ISO 179/1eA
Izod notched impact strength, 73°F	5.23 / 5.23	ftlb/in²	ISO 180/1A
Izod notched impact strength, -22°F	4.76 / 4.76	ftlb/in²	ISO 180/1A
Izod impact strength, -22°F	23.8 / 19	ftlb/in²	ISO 180/1U
Hardness, Rockwell, M-scale	108 / -		ISO 2039-2
Hardness, Rockwell, R-scale	124 / -		ISO 2039-2
Poisson's ratio	0.33 / 0.33
Tribological properties	dry/cond.
Coefficient of sliding friction, 1h against steel	- / 0.35                                                                ASTM 1894

Thermal properties	dry/cond.
Melting temperature, 18°F/min	572 / *	°F	ISO 11357-1/-3
Melting temperature, first heat	572 / *	°F	ISO 11357-1/-3
Temperature of deflection under load, 260 psi	507 / *	°F	ISO 75-1/-2
Temperature of deflection under load, 65 psi	543 / *	°F	ISO 75-1/-2
Vicat softening temperature, 90°F/h, 11 lbf	554 / *	°F	ISO 306
Coeff. of linear therm. expansion, parallel, -40-23°C	0.1 / *	E-4/°F	ISO 11359-1/-2
Coefficient of linear thermal expansion (CLTE), parallel	0.10 / *	E-4/°F	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal, -40-23°C	0.306 / *	E-4/°F	ISO 11359-1/-2
Coefficient of linear thermal expansion (CLTE), normal	0.306 / *	E-4/°F	ISO 11359-1/-2
Thermal conductivity of melt	0.25	W/(m K)	ISO 22007-2
Specific heat capacity of melt	1840	J/(kg K)	ISO 22007-4
RTI, electrical, 30mil	302	°F	UL 746B
RTI, electrical, 60mil	302	°F	UL 746B
RTI, electrical, 120mil	302	°F	UL 746B
RTI, impact, 30mil	257	°F	UL 746B
RTI, impact, 60mil	257	°F	UL 746B
RTI, impact, 120mil	266	°F	UL 746B
RTI, strength, 30mil	266	°F	UL 746B
RTI, strength, 60mil	284 / *	°F	UL 746B
RTI, strength, 120mil	302	°F	UL 746B
Flammability	dry/cond.
Burning Behav. at 60mil nom. thickn.	HB / *	class	IEC 60695-11-10
Thickness tested	0.0591 / *	in	IEC 60695-11-10
UL recognition	yes / *		UL 94
Burning Behav. at thickness h	HB / *	class	IEC 60695-11-10
Thickness tested	0.0335 / *	in	IEC 60695-11-10
UL recognition	yes / *		UL 94
Oxygen index	24 / *	%	ISO 4589-1/-2
Glow Wire Flammability Index, 30mil	1380 / -	°F	IEC 60695-2-12
Glow Wire Flammability Index, 60mil	1380 / -	°F	IEC 60695-2-12
Glow Wire Flammability Index, 120mil	1760 / -	°F	IEC 60695-2-12
Glow Wire Ignition Temperature, 60mil	1430 / -	°F	IEC 60695-2-13
Glow Wire Ignition Temperature, 120mil	1470 / -	°F	IEC 60695-2-13
FMVSS Class	B		ISO 3795 (FMVSS 302)
Burning rate, Thickness 1 mm	0.906	in/min	ISO 3795 (FMVSS 302)
Electrical properties	dry/cond.
Relative permittivity, 100Hz	4 / -		IEC 62631-2-1
Relative permittivity, 1MHz	4 / -		IEC 62631-2-1
Dissipation factor, 1MHz	120 / -	E-4	IEC 62631-2-1
Volume resistivity	>1E13 / 1E13	Ohm.m	IEC 62631-3-1
Surface resistivity	* / 1E14	Ohm	IEC 62631-3-2
Electric strength	914 / 914	kV/in	IEC 60243-1
Comparative tracking index	600 / 600		IEC 60112

Injection molding
 

During molding, use proper protective equipment and adequate ventilation. Avoid exposure to fumes and limit the hold up time and temperature of the resin in the



machine. Purge degraded resin carefully with HDPE.
When lower mold temperatures are used, the initial warpage and shrinkage may   be lower, but the surface appearance and chemical resistance may be reduced,    and the dimensional change may be greater when parts are subsequently heated
 

 

Packaging & Shipping

Our Advantages

 

PPA Engineering Plastics with High Dimensional Stability

 

Experience the exceptional quality and reliability of our PPA Engineering Plastics with High Dimensional Stability. With over 10 years of factory experience, Suzhou Furenxiang Trade Co., Ltd. is a trusted name in the industry.

 

Our PPA Engineering Plastics are known for their outstanding dimensional stability, making them perfect for a wide range of applications. Whether you need high stability plastics for injection molding, flame retardant plastics for safety, or chemical resistant plastics for durability, our product has you covered.

 

Manufactured using advanced techniques and American engineering plastics, our PPA Engineering Plastics offer superior performance and long-lasting durability. The glass fiber reinforced plastic ensures added strength and reliability, making it an ideal choice for demanding applications.

 

At Suzhou Furenxiang Trade Co., Ltd., we prioritize customer satisfaction. Our perfect service management system ensures that you receive professional service and support throughout your experience with us. We also offer customization options to meet your specific requirements.

 

Choose our PPA Engineering Plastics for their good and guaranteed quality, reasonable price, and the peace of mind that comes with a trusted supplier. Contact us today to learn more about our range of high stability plastics and how they can benefit your business.

Company Profile

COMPANY INFORMATION

Our company is a plastic manufacturer and agent for internationally renowned brands:

1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PPA PPA6 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. Our materials are widely used in automobile manufacturing, household appliances, communication electronics, industrial equipment and other industries.

2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic,  Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PPA PPA6 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc.

 

Certifications

 

FAQ

  Q:What can you buy from us?
A:PLA,PCTG,ABS,EAA,POM,EVA,POE,PPSU,EMAA,PA66,PC,PC/ABS,PE,POP.

Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.

Q:What are your terms of payment?
A:T/T, L/C,D/P,D/A. Option A:30% pay in advance, 70% before shipping

Q:What is your packing?
A:Basically our packing is in 25/KG bags.

Q:Where is the loading port?
A:Usually Shanghai.

Q:What is the normal lead time?
A:  We will send goods to departure port within 7-15 workdays after we receive your payment.

Q:If any quality problem, how can you settle it for us?
A:When discharging the container, you need to inspect all the goods. If anybreakage or defect products were found, you MUST take the pictures fromthe original carton. All the claims must be presented within 7 working days after discharging the container.This date is subject the arrival time of container. We will advise you to certify the claim by third party,or we can accept the claim from the samples or pictures you present, discharging of the containeris not included. Finally we will completely compensate all your loss.