Autoclavable Steam Sterilizable PSU Plastic Granules Medical Industry Applications

Product Description

Product Description

PSU  P1700 

1. Outstanding Thermal Stability:Can continuously operate at high temperatures up to 149°C (300°F), maintaining excellent mechanical and physical properties. It has a high glass transition temperature, ensuring dimensional stability even in harsh thermal environments.

1. Exceptional Mechanical Strength:Exhibits high tensile and flexural strength, providing good resistance to impact and stress. This makes it suitable for applications where structural integrity is crucial.

1. Superior Chemical Resistance:Highly resistant to mineral acids, alkalis, salt solutions, detergents, and hydrocarbon oils. Although it may be attacked by polar solvents like ketones, chlorinated hydrocarbons, and aromatic hydrocarbons, its overall chemical resistance is far better than many common plastics.

1. Biocompatibility:Meets FDA 21 CFR 177.1655 requirements and is approved by NSF, USDA for food and meat/poultry contact, as well as 3 - A sanitary standards of the dairy association. It can be used in applications involving direct contact with food or the human body.

1. Good Dimensional Stability:With a low coefficient of linear thermal expansion and minimal water absorption, it shows excellent dimensional stability during processing and in various service conditions.

1. Sterilizability:Can withstand repeated sterilization methods such as steam sterilization, sterilization, e - beam sterilization, and radiation sterilization, which is crucial for medical and food - related applications.

 

 

Product Application

1. Medical Field:Used in manufacturing surgical instruments like forceps and tweezers, dialysis machine components, infusion connectors, dental tools, and medical sterilization trays. Its biocompatibility and sterilizability make it an ideal choice for medical devices.

1. Electrical and Electronics:Applied in high - frequency connectors, transformer bobbins, circuit breaker housings, LED heat sinks, and printed circuit board (PCB) substrates. Its excellent electrical insulation properties, heat resistance, and dimensional stability are well - suited for these applications.

1. Automotive Industry:Utilized in engine - related components such as sensor housings, oil pipe connectors, headlamp reflectors, automotive electronic enclosures, and fuel cell parts. It can withstand the high - temperature and high - stress environments in automotive engines.

1. Food Industry:Employed in food - grade pumps, valves, coffee machine parts, microwave oven liners, and food conveyor rollers. Its compliance with food - contact regulations and good chemical resistance make it suitable for food - processing equipment.

1. Aerospace:Used in aircraft interior components like instrument panel brackets, wire insulation layers, as well as in UAV structural parts and satellite electronic component housings. Its high strength - to - weight ratio, heat resistance, and flame - retardant properties meet the strict requirements of the aerospace industry.

1. Water Treatment:Applied in ultrafiltration and reverse osmosis membrane supports, water treatment equipment valves, pump impellers, and pipe joints. Its hydrolytic stability and chemical resistance enable it to function well in water - related environments.

1. Precision Machinery:Used in bearing cages, gears, pump impellers, compressor valve plates, and copier fuser rollers. Its high - temperature mechanical strength, wear resistance, and dimensional stability are beneficial for precision mechanical parts.

 

technical information

PSU P1700 Product Information

Availabity Features	·Asia  Pacific ·Europe	·Latin  America ·North  America
	·Acid    Resistant ·Alcohol  Resistant ·Alkali  Resistant ·Autoclave  Sterilizable ·Biocompatible ·Chemical   Resistant ·Detergent  Resistant ·E-beam  Sterilizable · Sterilizable ·Food   Contact   Acceptable ·Good  Dimensional  Stability ·Good  Steriizability	·Good Surface Finish ·Good  Toughness ·Heat  Sterilizable ·High Heat Resistance ·Hydrocarbon Resistant ·Hydrolytically  Stable ·Radiation(Gamma)Resistant ·Radiation  Sterilizable ·Radiotranslucent ·Steam    Resistant ·Steam  Sterilizable
Uses	·Appliance   Components ·Appliances ·Automotive Eectronics ·Dental Applications ·Bectrical  Parts ·EectricaVElectronic  Applications ·Food Service Applications ·Hospital   Goods	·Industrial  Parts ·Medical  Devices ·MedicaVHeatthcare Appications ·Microwave  Cookware ·Piping ·Plumbing  Parts ·Surgical  Instruments ·Valves/Valve  Parts
Agency Ratings	·FDA 21 CFR 177.1655 ·ISO  10993	·NSF ·NSF	STD-511 STD-61²
PoHS Compliance	·PoHS  Compliant
Automotive Specifications	·ASTM D6394 SP0112	·BMW GS93016
Appearance	·Colors Available	·Transparent -Sight Yellow
Forms	·Pellets

·Extrusion	·Machining
·Extrusion Blow Molding	·Pipe   Extrusion
Processing Method               ·Fim Extrusion	·Profile  Extrusion
·hjection Blow Moking	·Sheet    Extrusion
·Ihjection Molding	·Thermoforming
Physical	Typical Value Unit	Test method
Density/Specific Gravity	1.24	ASTM D792
Melt Mass-Fow Rate(MFR)(343ºC/2.16kg)	6.5 g/10 min	ASTMD1238
Mokding Shrinkage-Flow	0.70%	ASTM D955
Water Absorption (24 hr)	0.30 %	ASTM D570
Mechanical	Typical Value Unit	Test method
Tensile Modulus	2480 MPa	ASTM D638
Tensile Strength	70.3 MPa	ASTM D638
Tensile Bongation (Break)	50 to 100 %	ASTM D638
Flexural Modulus	2690 MPa	ASTM D790
Flexural Strength	106 MPa	ASTM D790
Impact	Typical Value Unit	Test method
Notchedlzod Impact	69 J/m	ASTM D256
Tensile Impact Strength	420  kJ/m²	ASTMD1822
Thermal	Typical Value Unit	Tes method
Deflection Temperature Under Load 1.8 MPa,Unannealed	174ºC	ASTM D648
CLTE-Flow	5.6E-5 cm/cmºC	ASTM D696

Volume Resistivity	3.0E+16 ohms ·cm	ASTM D257
Dielectric Strength	17 KV/mm	ASTM D149
Dielectric Constant 60 Hz 1 kHz 1 MHz	3.03 3.04 3.02	ASTM D150
Dissipation Factor 60 Hz 1 kHz 1 MHz	7.0E-4 1.0E-3 6.0E-3	ASTM D150
Fammability	Typical Value Unit	Test method
Flame Rating 1.5mm,ALL 4.5mm,NC	HB V-0	UL94
Glow Wire Hammability lndex 0.8mm 1.6to 6.0 mm	850ºC 960ºC	IEC 60695-2-12

Glow Wire lgnition Temperature	IEC 60695-2-13
0.8mm	875ºC
1.6to 6.0 mm	850ºC
Injection	Typical Value Unit
Drying Temperature	135 to 163ºC
Drying Time	3.5 hr
Suggested Shot Size	50 to 75%
Processing(Melt)Temp	329 to 385ºC
Mold Temperature	121 to 163ºC

Packaging & Shipping

Company Profile

COMPANY INFORMATION

Our company is a plastic manufacturer and agent for internationally renowned brands:

1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing.

In terms of technology, in order to ensure the accuracy of product data and the unity of product performance indicators, the company has introduced a number of related tests such as flow testers, electronic water quality testers, environmental detectors, halogen testers, whiteness testers, constant temperature ovens, etc. Equipment, plastic dryers, film blowing machines, tablet presses, etc. Our materials are widely used in automobile manufacturing, household appliances, communication electronics, industrial equipment and other industries.

2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic,Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc.
 

 

 

Our Advantages

Professional Service

With over 10 years of factory experience, Suzhou Furenxiang Trade Co., Ltd. is dedicated to providing you with the highest quality products.

Good and Guaranteed Quality

Our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 is made with the utmost care and attention to detail, ensuring its excellent quality and durability.

Best Price for You

We offer the best price for our high-quality products, allowing you to get the best value for your money.

Perfect Service Management System

At Suzhou Furenxiang Trade Co., Ltd., we have a perfect service management system in place to ensure that your needs are met and that you receive the best possible customer service.

 

Certifications

FAQ

Q:What can you buy from us?
A:PLA,PCTG,ABS,EAA,POM,EVA,POE,PPSU,EMAA,PA66,PC,PC/ABS,PE,POP.

Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.

Q:What are your terms of payment?
A:T/T, L/C,D/P,D/A. Option A:30% pay in advance, 70% before shipping

Q:What is your packing?
A:Basically our packing is in 25/KG bags.

Q:Where is the loading port?
A:Usually Shanghai.

Q:What is the normal lead time?
A:  We will send goods to departure port within 7-15 workdays after we receive your payment.

Q:If any quality problem, how can you settle it for us?
A:When discharging the container, you need to inspect all the goods. If anybreakage or defect products were found, you MUST take the pictures fromthe original carton. All the claims must be presented within 7 working days after discharging the container.This date is subject the arrival time of container. We will advise you to certify the claim by third party,or we can accept the claim from the samples or pictures you present, discharging of the containeris not included. Finally we will completely compensate all your loss