UV-Stable Tpee Extrusion Material

• Customization: Available
• CAS No.: 1351272-41-7
• Color: White
• Material: Tpee
• Model No.: Tpee
• MOQ: 25kg
• Usage: Engineering Plastics
• Plastic Forming Method: Injection Molding
• Plastic Properties After Heated: Customized
• Sample: Available
• Delivery: 7-15 Days
• Material Attribute: Injection Grade
• Transport Package: 25kg/Bag, 40bag/Pallet
• Specification: 380*130*745(mm)
• Origin: America
• HS Code: 3902301000
• Production Capacity: 1000t/Month
• Package Size: 60.00cm * 40.00cm * 20.00cm
• Package Gross Weight: 25.000kg

Product Description

 

Product Description

 
TPEE stands for Thermoplastic Polyester Elastomer, which is a type of linear block copolymer. It consists of PBT (polybutylene terephthalate) polyester hard segments (crystalline phase) and aliphatic polyester or polyether (amorphous phase) soft segments. 

Performance Features

• Heat Resistance: TPEE has excellent heat resistance. Generally, the higher the hardness, the better the heat resistance. Its long-term working temperature can range from -70 °C to 125 °C, and it can withstand short-term high temperatures of 150 °C to 160 °C with relatively little loss of mechanical properties under high-temperature conditions.
• Chemical Resistance: It has outstanding oil resistance and can withstand most polar liquid chemical media at room temperature. Moreover, its ability to resist chemicals increases with the increase in hardness.
• Weather Resistance and Aging Resistance: TPEE has good chemical stability under various external conditions such as water mist, ozone, and outdoor atmosphere. However, it will undergo degradation under the action of ultraviolet light, so ultraviolet light protection additives should be added to the formulation when used outdoors.
• High Resilience: TPEE has high resilience. When applied in springs, for example, it can give the springs a long service life. Compared with rubber materials, it has greater reusability while maintaining good elasticity.

  

 

Installation Instructions

TPEE (Thermoplastic Polyester Elastomer) has a wide range of applications. The following is an introduction to its main application areas and corresponding product pictures:

 

• Electrical and Electronic Field: In the electrical and electronic industry, TPEE is used for cable sheaths, power cords, connector sheaths, and high-temperature-resistant wires. The TPEE cable sheath has excellent high-temperature resistance and insulation performance, which can effectively protect the safety and stability of electrical and electronic products.
• Medical Field: TPEE with good biocompatibility can be used to make medical devices such as catheters, infusion tubes, and masks. The TPEE - made medical catheter has good flexibility and wear resistance, which can improve the comfort of patients during use.
• Industrial Manufacturing Field: In industrial manufacturing, TPEE is used for seals, gaskets, conveyor belts, hoses, gears, couplings, bellows, and pneumatic tubes. The TPEE - made seal has good sealing performance and wear resistance, which can ensure the normal operation of industrial equipment.
• Consumer Goods Field: TPEE is also commonly used in consumer goods, such as sports equipment (ski boot buckles, bicycle grips, racket strings), footwear (soles, heels, insoles), power tool overmolds, and mobile phone cases. The TPEE - made sole has good elasticity and wear resistance, providing people with a comfortable wearing experience.

 

 

Product Parameters

Hytrel® 7246
THERMOPLASTIC POLYESTER ELASTOMER
 

Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.
Typical applications:
Tubing, wire and cable jackets, gears and sprockets, oil field parts.

 

Resin Identification Part Marking Code ISO designation	TPC ET >TPC-ET< ISO 20029-TPC-ET,,GLN,70-22-075		ISO 1043 ISO 11469
Rheological properties
Melt volume-flow rate	12	cm³/10min	ISO 1133
Temperature	240	°C
Load	2.16	kg
Melt mass-flow rate	13	g/10min	ISO 1133
Melt mass-flow rate, Temperature	240	°C
Melt mass-flow rate, Load	2.16	kg
Moulding shrinkage, parallel	1.6	%	ISO 294-4, 2577
Moulding shrinkage, normal	1.6	%	ISO 294-4, 2577
Typical mechanical properties
Tensile modulus	550	MPa	ISO 527-1/-2
Tensile stress at yield	27	MPa	ISO 527-1/-2
Tensile strain at yield	23	%	ISO 527-1/-2
Stress at 5% strain	14	MPa	ISO 527-1/-2
Stress at 10% strain	23	MPa	ISO 527-1/-2
Tensile stress at 50% strain, 1BA	24	MPa	ISO 527-1/-2
Tensile stress at break	50	MPa	ISO 527-1/-2

 

Nominal strain at break	530	%	ISO 527 1/ 2
Tensile strain at break	>300	%	ISO 527-1/-2
Flexural modulus	550	MPa	ISO 178
Shear Modulus	280	MPa	ISO 6721
Tensile creep modulus, 1h	360	MPa	ISO 899-1
Tensile creep modulus, 1000h	310	MPa	ISO 899-1
Charpy notched impact strength, 23°C	36	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	8	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -40°C	7	kJ/m²	ISO 179/1eA
Tensile notched impact strength, 23°C	300	kJ/m²	ISO 8256/1
Izod notched impact strength, 23°C	38	kJ/m²	ISO 180/1A
Izod notched impact strength, -40°C	7.0	kJ/m²	ISO 180/1A
Brittleness temperature	-97	°C	ISO 974
Shore D hardness, 15s	64		ISO 48-4 / ISO 868
Shore D hardness, max	68		ISO 868
Tear strength, parallel	180	kN/m	ISO 34-1
Tear strength, normal	170	kN/m	ISO 34-1
Abrasion resistance	100	mm³	ISO 4649
Thermal properties
Melting temperature, 10°C/min	218	°C	ISO 11357-1/-3
Glass transition temperature, 1 Hz	32	°C	ISO 6721
Temperature of deflection under load, 1.8 MPa	50	°C	ISO 75-1/-2
Temperature of deflection under load, 0.45 MPa	100	°C	ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N	140	°C	ISO 306
Vicat softening temperature, 50°C/h 10N	205	°C	ISO 306
Coeff. of linear therm. expansion, parallel, -40-23°C	120	E-6/K	ISO 11359-1/-2
Coefficient of linear thermal expansion (CLTE), parallel	180	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal, -40-23°C	130	E-6/K	ISO 11359-1/-2
Coefficient of linear thermal expansion (CLTE), normal	170	E-6/K	ISO 11359-1/-2
Thermal conductivity of melt	0.15	W/(m K)	ISO 22007-2
Effective thermal diffusivity, flow	8E-8	m²/s	ISO 22007-4
Specific heat capacity of melt	2150	J/(kg K)	ISO 22007-4
RTI, electrical, 1.5mm	85	°C	UL 746B
RTI, impact, 1.5mm	85	°C	UL 746B
RTI, strength, 1.5mm	75	°C	UL 746B
Flammability
Burning Behav. at 1.5mm nom. thickn.	HB	class	IEC 60695-11-10
Thickness tested	1.5	mm	IEC 60695-11-10
UL recognition	yes		UL 94
Oxygen index	23	%	ISO 4589-1/-2
FMVSS Class	DNI		ISO 3795 (FMVSS 302)

 

Relative permittivity, 100Hz	4		IEC 62631 2 1
Relative permittivity, 1MHz	3.5		IEC 62631-2-1
Dissipation factor, 100Hz	160	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	300	E-4	IEC 62631-2-1
Volume resistivity	2E10	Ohm.m	IEC 62631-3-1
Surface resistivity	>1E15	Ohm	IEC 62631-3-2
Electric strength	20	kV/mm	IEC 60243-1
Comparative tracking index	600		IEC 60112
Physical/Other properties
Humidity absorption, 2mm	0.2	%	Sim. to ISO 62
Water absorption, 2mm	0.6	%	Sim. to ISO 62
Water absorption, Immersion 24h	0.3	%	Sim. to ISO 62
Density	1260	kg/m³	ISO 1183
Density of melt	1110	kg/m³
VDA properties
Light stability delta l	-3		DIN 53236
Light stability delta a	-0.1		DIN 53236
Light stability delta b	15		DIN 53236
Light stability delta E	16		DIN 53236
Emission of organic compounds	300	µgC/g	VDA 277
Injection
Drying Recommended	yes
Drying Temperature	110	°C
Drying Time, Dehumidified Dryer	2 - 3	h
Processing Moisture Content	≤0.08	%
Melt Temperature Optimum	245	°C
Min. melt temperature	235	°C
Max. melt temperature	255	°C
Mold Temperature Optimum	50	°C
Min. mould temperature	45	°C
Max. mould temperature	55	°C
Hold pressure range	≤70	MPa
Ejection temperature	149	°C
Extrusion
Drying Temperature	100 - 120	°C
Drying Time, Dehumidified Dryer	2 - 3	h
Processing Moisture Content	≤0.06	%
Melt Temperature Optimum	235	°C
Melt Temperature Range	225 - 245	°C

 

Packaging & Shipping

 

 

Our Advantages

Introducing Our High-Performance Chemical-Resistant Engineering Plastics

Welcome to Suzhou Furenxiang Trade Co., Ltd., where we bring you the ultimate in high-performance engineering plastics. With over 10 years of factory experience, we are proud to offer you our top-of-the-line Durable TPV Engineering Plastics.

Our industrial-grade glass fiber reinforced nylon is perfect for a wide range of applications. Whether you require injection molding plastics or flame retardant TPV compound, our advanced plastic material sourced from the USA guarantees exceptional quality and reliability.

At Suzhou Furenxiang Trade Co., Ltd., we prioritize offering the best products at reasonable prices. With our perfect service management system, you can expect a seamless and hassle-free experience from start to finish. And if customization is what you need, our team is ready to tailor our products to meet your specific requirements.

When it comes to industrial-grade engineering plastics, we are the go-to supplier. Our high-strength reinforced nylon and durable plastic resin material are designed to withstand even the toughest conditions. From chemical and heat-resistant TPV6 resin to versatile PBT and TPV plastic compounds, we have it all.

Don't settle for subpar plastic products. Choose Suzhou Furenxiang Trade Co., Ltd. as your reliable engineering plastic supplier. Our quality glass fiber reinforced plastics and flame retardant engineering plastics are the perfect choice for industrial applications. With our high-performance plastic material, you can trust that your projects will be a success.

So why wait? Take advantage of our 10 years of factory experience and get your hands on the best engineering plastics in the market. Contact us today and let us provide you with the perfect solution for your industrial needs. Your satisfaction is our guarantee!                        

Company Profile

 

COMTPVNY INFORMATION

Our comTPVny is a plastic manufacturer and agent for internationally renowned brands:

1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our comTPVny has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production caTPVcity of 3, 500 tons. Our comTPVny specializes in R&D and production of PP PBT TPV TPV6 PTPV PC PC/TPV. The comTPVny has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our comTPVny has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The comTPVny starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. Our materials are widely used in automobile manufacturing, household appliances, communication electronics, industrial equipment and other industries.

2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, , Polytechnic, , Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/TPV TPV PPO PBT TPV TPV TPV6 PTPV LCP TPE TPU ASA PCR (PC/TPV PC/PET), etc.

 

Certifications

 

FAQ

Q:What can you buy from us?
A:ABS,EAA,EVA,POE,TPU,EMAA,PA66,PC,TPV,PE,POP.

Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.

Q:What are your terms of payment?
A:T/T, L/C,D/P,D/A. Option A:30% pay in advance, 70% before shipping

Q:What is your packing?
A:Basically our packing is in 25/KG bags.

Q:Where is the loading port?
A:Usually Shanghai.

Q:What is the normal lead time?
A:  We will send goods to departure port within 7-15 workdays after we receive your payment.

Q:If any quality problem, how can you settle it for us?
A:When discharging the container, you need to inspect all the goods. If anybreakage or defect products were found, you MUST take the pictures fromthe original carton. All the claims must be presented within 7 working days after discharging the container.This date is subject the arrival time of container. We will advise you to certify the claim by third party,or we can accept the claim from the samples or pictures you present, discharging of the containeris not included. Finally we will completely compensate all your loss.