| Customization: | Available |
|---|---|
| Color: | Customized |
| Model No.: | PA6 |
|
Still deciding? Get samples of US$ 0.1/kg
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Experience the exceptional qualities of Germany Black B30s PA6 Injection Molding, also known as nylon 6. This translucent or opaque milky white particle is not only thermoplastic and lightweight, but it also possesses remarkable toughness, chemical resistance, and durability.
What sets Germany Black B30s PA6 apart is its unparalleled wear resistance. In fact, it surpasses all other fibers, with 10 times the wear resistance of cotton and an impressive 20 times the wear resistance of wool. The strength of nylon fiber is also remarkable, being 1-2 times stronger than cotton, 4-5 times stronger than wool, and 3 times stronger than viscose fiber.
In the industry field, Germany Black B30s PA6 is widely utilized for various applications. It is commonly used to manufacture round gears, cams, bevel gears, rollers, pulleys, pump impellers, fan blades, worm gears, and more.
Discover the versatility and reliability of Germany Black B30s PA6 Injection Molding, brought to you by Suzhou Furenxiang Trade Co., Ltd.
Durethan® B 30 S 000000
Polyamide 6
LANXESS Corporation
| Basic Information | |||||
| Yellow Card Information | E245249-473560 | ||||
| Institutional Ratings | EC 1907/2006 (REACH) | ||||
| form | particle | ||||
| Processing methods | Injection molding | ||||
| Physical properties | Drying Adjusted Units | Test Method | |||
| proportion | |||||
| -- | 1.14 | -- | g/cm³ | ASTM D792 | |
| 23°C | 1.14 | -- | g/cm³ | ISO 1183 | |
| Apparent density | 0.70 | -- | g/cm³ | ISO 60 | |
| Shrinkage | |||||
| Vertical flow direction: 260°C, 3.00 mm 1 | 1.2 |
-- |
% | ISO 2577 |
|
| Vertical flow direction: 120°C, 2 hours, 3.00 mm 2 | 0.40 |
-- |
% | ISO 294-4 |
|
| Flow direction: 260°C, 3.00 mm 3 | 1.0 | -- | % | ISO 2577 | |
| Flow direction: 120°C, 2 hours, 3.00 mm 4 | 0.32 |
-- |
% | ISO 2577 |
|
| Water absorption | ISO 62 | ||||
| saturation, 23°C | 10 | -- | % | ISO 62 | |
| Equilibrium, 23°C, 50% RH | 3.0 | -- | % | ISO 62 | |
| hardness | dry | Adjusted | Unit system | Test Method | |
| Ball pressure hardness | 140 | 50.0 | MPa | ISO 2039-1 | |
| Mechanical properties | dry | Adjusted | Unit system | Test Method | |
| Tensile modulus | |||||
| 5 23°C | 3200 | 1100 | MPa | ASTM D638 | |
| -5°C | 3200 | 1000 | MPa | ISO 527-2/1 | |
| Tensile Strength | |||||
| yield, 23°C | 80.0 | 40.0 | MPa | ASTM D638, ISO 527-2/50 | |
| fracture, 23°C | 50.0 | 60.0 | MPa | ASTM D638 | |
| Elongation | |||||
| yield, 23°C | 4.0 | 20 | % | ASTM D638, ISO 527-2/50 | |
| fracture, 23°C | 35 | > 50 | % | ASTM D638 | |
| Nominal tensile strain at break (23°C) | 20 | > 50 | % | ISO 527-2/50 | |
| Tensile creep modulus | ISO 899-1 | ||||
| 1 hr | -- | 800 | MPa | ISO 899-1 | |
| 1000 hr | -- | 600 | MPa | ISO 899-1 |
| Flexural modulus | ||||
| 23°C | 2700 | 703 | MPa | ASTM D790 |
| 6 23°C | 2900 | 850 | MPa | ISO 178/A |
| Bending Strength | ||||
| 5.0% strain, 23°C | 115 | 35.0 | MPa | ASTM D790 |
| 3.5% strain 7 | 95.0 | 25.0 | MPa | ISO 178/A |
| 8 23°C | 110 | 35.0 | MPa | ISO 178 |
| Flexural Strain at Flexural Strength 9 (23°C) | 6.0 |
8.0 |
% | |
| Burning Behavior 10 (> 1.0 0 mm) | passed | -- | ISO 3795 | |
| ISO Shortname | PA 6, GR, 14-030 | -- | ISO 1874 | |
| Residual Moisture Content | 0.030 to 0.12 | % | Karl Fisher | |
| film | dry | Adjusted | Unit system | Test Method |
| Membrane puncture strength | ISO 6603-2 | |||
| 11 | 10.0 | -- | J | ISO 6603-2 |
| 12 | 12.0 | -- | J | ISO 6603-2 |
| Membrane puncture force | ISO 6603-2 | |||
| 13 | 6540 | -- | N | ISO 6603-2 |
| 14 | 5140 | -- | N | ISO 6603-2 |
| Impact performance | dry | Adjusted | Unit system | Test Method |
| Simple supported beam notched impact strength | ISO 179/1eA | |||
| -30°C | < 10 | < 10 | kJ/m² | ISO 179/1eA |
| 23°C | < 10 | 20 | kJ/m² | ISO 179/1eA |
| Simply supported beam unnotched impact strength | ISO 179/1eU | |||
| -30°C | No break | No break | ISO 179/1eU | |
| 23°C | No break | No break | ISO 179/1eU | |
| Izod notched impact strength | ||||
| 23°C, 3.18 mm | 59 | 750 | J/m | ASTM D256 |
| 23°C | < 10 | < 10 | kJ/m² | ISO 180/1A |
| Unnotched Izod impact strength | ISO 180/1U | |||
| -30°C | No break | No break | ISO 180/1U | |
| 23°C | No break | No break | ISO 180/1U | |
| Thermal properties | dry | Adjusted | Unit system | Test Method |
| Heat Deformation Temperature Under Load | ||||
| 0.45 MPa, unannealed, 3.99 mm | 180 | -- | °C | ASTM D648 |
| 0.45 MPa, unannealed | 160 | -- | °C | ISO 75-2/B |
| 1.8 MPa, unannealed, 3.99 mm | 60.0 | -- | °C | ASTM D648 |
| 1.8 MPa, unannealed | 55.0 | -- | °C | ISO 75-2/A |
| 8.0 MPa, unannealed | 45.0 | -- | °C | ISO 75-2/C |
| Vicat softening temperature | 200 | -- | °C | ISO 306/B50, ISO 306/B120 |
| Melting temperature 15 | 222 | -- | °C | ISO 11357-3 |
| Coefficient of linear thermal expansion | ISO 11359-2 | ||||||
| flow : twenty three arrive 55°C | 1.0E-4 | -- | cm/cm/°C | ISO 11359-2 | |||
| Horizontal : twenty three arrive 55°C | 1.1E-4 | -- | cm/cm/°C | ISO 11359-2 | |||
| RTI Elec (1.50 mm) | 105 | -- | °C | UL 746 | |||
| RTI Imp (1.50 mm) | 65.0 | -- | °C | UL 746 | |||
| RTI (1.50 mm) | 75.0 | -- | °C | UL 746 | |||
| Electrical properties | dry | Adjusted | Unit system | Test Method | |||
| Surface resistivity | 1.0E+13 to 1.0E+14 | 1.0E+12 to 1.0E+13 | ohms | IEC 60093 | |||
| Volume resistivity (23°C) | 1.0E+15 | 1.0E+12 | ohms cm | IEC 60093 | |||
| Dielectric strength | IEC 60243-1 | ||||||
| 23°C, 1.00 mm | 30 | 30 | kV/mm | IEC 60243-1 | |||
| 23°C, 3.00 mm | 30 | 35 | kV/mm | IEC 60243-1 | |||
| Dielectric constant | IEC 60250 | ||||||
| 23°C, 50 Hz | 16 | 3.80 | 20.0 | IEC 60250 | |||
| 23°C, 1 MHz | 17 | 3.40 | 4.60 | IEC 60250 | |||
| 23°C, 100 Hz | 4.00 | 15.0 | IEC 60250 | ||||
| 23°C, 1 MHz | 3.50 | 4.00 | IEC 60250 | ||||
| Dissipation Factor | IEC 60250 | ||||||
| 23°C, 50 Hz | 0.050 | 2.3 | IEC 60250 | ||||
| 23°C, 100 Hz | 0.017 | 0.20 | IEC 60250 | ||||
23°C, 1 MHz |
0.020 0.070 |
0.12 0.40 |
IEC 60250 |
||||
| Tracking Index | |||||||
| Solution A 18 | 600 | -- | V | IEC 60112 | |||
| Solution B | 600 | -- | V | IEC 60112 | |||
| -- | -- | 600 | V | ASTM D3638 | |||
| Flammability | dry | Adjusted | Unit system | Test Method | |||
| UL Flame retardant grade | UL 94 | ||||||
| 1.50 mm | V-2 | -- | UL 94 | ||||
| 3.00 mm | V-2 | -- | UL 94 | ||||
| Glow Wire Flammability Index (2.00 mm) | 750 | -- | °C | IEC 60695-2-12 | |||
| Limiting oxygen index | 19 | 26 | -- | % | ISO 4589-2 | ||
| injection | dry | Unit system | Test Method | ||||
| Drying temperature - Dry Air Dryer | 80.0 | °C | |||||
| Drying time - Dry Air Dryer | 2.0 to 6.0 | hr | |||||
| Processing (melt) temperature | 260 to 280 | °C | |||||
| Mold temperature | 80.0 to 100 | °C | |||||
| Remark | |||||||
| 1. | 150x150x3; MT 80°C; 500 Bar | ||||||
| 2. | 150x150x3 | ||||||
| 3. | 150x150x3; MT 80°C; 500 Bar | ||||||
Experience professional service with Suzhou Furenxiang Trade Co., Ltd. We have 10 years of factory experience, ensuring good and guaranteed quality for our customers. Our reasonable prices make it a perfect choice for you.
With our perfect service management system, you can expect a smooth and hassle-free experience. We also offer customization options to meet your specific needs.
Our Germany Black B30s PA6 Injection Molding is made from high-quality engineering plastics. It is a flame retardant plastic material that is also chemical resistant. The reinforced plastic resin provides increased toughness, making it perfect for various applications.
Whether you need customized ABS plastic, flexible PBT resin, or PA66 engineering plastics, we have you covered. Our products are known for their flame retardant V0 properties and are made with the highest standards in mind.
Choose our Germany Black B30s PA6 Injection Molding for reliable and durable nylon fabric for garments. The rigid plastic chips ensure excellent performance, while the toughened plastic chips provide added strength.
Experience the quality of German-made plastic products with Suzhou Furenxiang Trade Co., Ltd. Order our Germany Black B30s PA6 Injection Molding today and enjoy the benefits of our professional service and guaranteed quality.
|
COMPANY INFORMATION
|
|
| Our company is a plastic manufacturer and agent for internationally renowned brands: 1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. Our materials are widely used in automobile manufacturing, household appliances, communication electronics, industrial equipment and other industries. 2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic,Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc. |
){kind=link}