CAS No.: | 25038-54-4 |
---|---|
Molecular Principal Chain: | Glass Fiber Reinforced Resin |
Color: | Natural/ Black/ Customized |
Samples: |
Please Contact Us
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
NYLON RESIN PA6+GF20 Product Information Siney® The company has a good balance of rigidity and toughness, dimensional stability, chemical resistance, heat resistance and easy processing; in addition, Siney® nylon resin has a variety of specifications to meet the diverse product needs of customers, and can also meet the customized product processes and uses of customers, including most flame retardant grades and various use environments, customized colors, etc. Lizhao™ Siney® resin is usually used in the: ![]() |
Sineny® BG4 K00044
![]() |
Sineny® BG4 K00044
Physical Properties | Typical Values | Unit | Test Conditions | Test Standard |
Density | 1.23 | g/cm³ | ASTM D792 | |
Melt Index | 11 | g/10min | 260ºC/2.16KG | ASTM D1238 |
Mold Shrinkage | 0.4 0.7 |
% % |
Flow Direction Flow Vertical direction |
ASTM D955 |
Mechanical Properties | Typical Values | Unit | Test Conditions | Test Standard |
lzod Notched Impact Strength | 130 | J/M J/M |
23ºC -40ºC |
ASTM D256 |
Stress at break | 145 | Mpa | 10mm/min | ASTM D638 |
Elongation at break | 3 | % | 10mm/min | ASTM D638 |
Flexural Strength | 220 | Mpa | 2mm/min | ASTM D790 |
Flexural Modulus | 6000 | Mpa | 2mm/min | ASTM D790 |
Other Properties | Typical Values | Unit | Test Conditions | Test Standard |
Flammability | HB HB HB |
- - - |
1.6mm 3.2mm 0.8mm |
UL94 |
Heat Deflection Temp | 190 | ºC ºC |
1.80Mpa 0.45Mpa |
ASTM D648 |
Processing Conditions | Typical Values | Unit | Start Point | Range |
Melt Temp | 220 | 220-240ºC | ||
Barrel Zone Temp | Rear Center Front Injector |
220 240 260 260 |
220-240ºC 230-260ºC 240-270ºC 240-260ºC |
|
Mold Temp. | 65 | 60-80ºC | ||
Processing Temp.Limit | 300 | 300 | ||
Injection Speed | Moderate to high | 60-80 | ||
Pre-Dry Requirements | 110ºC,3-5H | 90-110ºC |
Suppliers with verified business licenses